Gated Burst Mode - Keysight Technologies 33210A User Manual

10 mhz function/arbitrary waveform generator

Hide thumbs Also See for 33210A:

Table of Contents

Gated Burst Mode

In the Gated Burst mode, the output waveform is either "on" or "off " based on the

level of the external signal applied to the rear-panel Trig In connector. When the

gate signal is true, the function generator outputs a continuous waveform. When

the gate signal goes false, the current waveform cycle is completed and then the

function generator stops while remaining at the voltage level corresponding to the

starting burst phase of the selected waveform.

Keysight 33210A User's Guide