To Select "Dc Volts - Keysight Technologies 33210A User Manual

1 Quick Start

To Select "DC Volts"

You can select the "DC Volts" feature from the "Utility" menu, and then set a
constant dc voltage as an "Offset" value. Let's set "DC Volts" = 1.0 Vdc.
1 Press
2 Enter the desired voltage level as an "Offset".
32
and then select the DC On softkey.
The Offset value becomes selected.
Enter 1.0 Vdc with the numeric keypad or knob.
You can enter any dc voltage from -5 Vdc to +5 Vdc.
Keysight 33210A User's Guide