Keysight Technologies 33210A User Manual page 122

3 Features and Functions
– The trigger source setting is stored in volatile memory; the source is set to
– Front-Panel Operation: After enabling sweeps or bursts, press the Trigger
– Remote Interface Operation:
Internal Triggering
In the internal trigger mode, the function generator continuously outputs the
sweep or burst (as specified by the sweep time or burst period). This is the default
trigger source for both front-panel and remote interface use.
– Front-Panel Operation: Press the Trigger Setup softkey and then select the
– Remote Interface Operation:
122
internal trigger (front panel) or immediate (remote interface) when power has
been off or after a remote interface reset. (Provided that the Power On state is
set to Default.)
Setup softkey. Then select the desired source by pressing the Source softkey.
TRIGger:SOURce {IMMediate|EXTernal|BUS}
The APPLy command automatically sets the source to Immediate.
Source Int softkey.
TRIGger:SOURce IMMediate
Keysight 33210A User's Guide