Keysight Technologies 33210A User Manual page 135

– You can assign a custom name to each of the storage locations (however,
– The name can contain up to 12 characters. The first character must be a letter
– The function generator will not prevent you from assigning the same custom
– If you delete an arbitrary waveform from non-volatile memory after storing the
– The front-panel display state (see
– An instrument reset does not affect the configurations stored in memory. Once
Keysight 33210A User's Guide
you cannot name location "0" from the front panel).
You can name a location from the front panel or over the remote interface,
but you can only recall a state by name from the front panel. From the remote
interface, you can only recall a stored state using a number (0 through 4).
(A-Z), but the remaining characters can be letters, numbers (0-9), or the
underscore character (" _ "). Blank spaces are not allowed. An error will be
generated if you specify a name with more than 12 characters.
name to different storage locations. For example, you can assign the same
name to locations "1" and "2".
instrument state, the waveform data is lost and the function generator will not
output the waveform when the state is recalled. The built-in "exponential rise"
waveform is output in place of the deleted waveform.
when you store the instrument state. When you recall the state,
the front-panel display will return to the previous state.
a state is stored, it remains until it is overwritten or specifically deleted.
Features and Functions
"Display Control" on page 140) is saved
3
135