Keysight Technologies 33210A User Manual page 114

3 Features and Functions
– When the gated mode is selected, the burst count, burst period, and trigger
– When the gated mode is selected, you can also select the polarity of the signal
– Front-Panel Operation: After enabling bursts, press the N Cycle (triggered) or
– Remote Interface Operation:
– Use the following command to select the polarity of the external gate signal on
114
source are ignored (these parameters are used for the triggered burst mode
only). If a manual trigger is received, it is ignored, and no error will be
generated.
on the rear-panel Trig In connector.
Gated softkey.
To select the polarity of the external gate signal on the Trig In connector, press
the Polarity softkey. The default polarity is POS (true-high logic).
BURSt:MODE {TRIGgered|GATed}
the Trig In connector. The default if NORM (true-high logic).
BURST:GATE:POLarity {NORMal|INVerted}
Keysight 33210A User's Guide