Keysight Technologies 33210A User Manual page 295

Error Messages 5
-109
Missing parameter
Fewer parameters were received than were expected for this command. You have
omitted one or more parameters that are required for this command.
Example: OUTP:LOAD
-112
Program mnemonic too long
A command header was received which contained more than the maximum 12
characters allowed. This error is also reported when a character-type parameter is
too long. Example: OUTP:SYNCHRONIZATION ON
-113
Undefined header
A command was received that is not valid for this instrument. You may have
misspelled the command or it may not be a valid command. If you are using the
short form of the command, make sure that it is correctly abbreviated.
Example: TRIGG:SOUR BUS
-123
Exponent too large
A numeric parameter was found whose exponent was larger than 32,759.
Example: BURS:NCYCL 1E34000
-124
Too many d igits
A numeric parameter was found whose mantissa contained more than 255 digits,
excluding leading zeros.
-128
Numeric data not allowed
A numeric parameter was received but a character string was expected.
Example: DISP:TEXT 123
Keysight 33210A User's Guide 295