Table of Contents
Advertisement
3
Features and Functions
Introduction
This chapter makes it easy to look up all the details about a particular feature of
the function generator. It covers both front panel and remote interface operation.
You may want to read
Chapter 4, "Remote Interface Reference"
the SCPI commands to program the function generator. This chapter is divided
into the following sections:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Throughout this manual "default" states and values are identified. These are the
NOTE
power-on default states provided you have not enabled the power-down recall
mode (see
66
Chapter 2, "Front-Panel Menu
Output Configuration
Pulse Waveforms
on page 83
Amplitude Modulation (AM)
Frequency Modulation (FM)
Pulse Width Modulation (PWM)
Frequency Sweep
on page 105
Burst Mode
on page 112
Triggering
on page 121
Optional Arbitrary Waveforms (Option 002)
System-Related Operations
Remote Interface Configuration
External Timebase Reference (Option 001)
Calibration Overview
Factory Default Settings
"Instrument State Storage"
for a detailed discussion of the syntax of
on page 68
on page 87
on page 92
on page 99
on page 134
on page 143
on page 155
on page 159
on page 134).
Operation", first. See
on page 127
on page 153
Keysight 33210A User's Guide
Advertisement
Table of Contents
