Keysight Technologies 33210A User Manual page 256

4 Remote Interface Reference
*IDN?
Read the function generator's identification string which contains four fields
separated by commas. The first field is the manufacturer's name, the second field
is the model number, the third field is the serial number, and the fourth field is a
revision code which contains four numbers separated by dashes.
– The command returns a string with the following format (be sure to dimension
DISPlay {OFF|ON}
DISPlay?
Disable or enable the function generator front-panel display. When it is disabled,
the front-panel display is blanked (however, the bulb used to backlight the display
remains enabled). The DISP? query returns "0" (OFF) or "1" (ON).
– With the front-panel display disabled, there will be some improvement in
– Sending a message to the front-panel display from the remote interface
– The display is automatically enabled when power is cycled, after an instrument
– The display state is saved when you store the instrument state using *SAV
256
a string variable with at least 50 characters).
Keysight Technologies,33210A,<serial number>,f.ff-b.bb-aa-p
f.ff = Firmware revision number
b.bb = Boot kernel revision number
aa = ASIC revision number
p = Printed circuit board revision number
command execution speed from the remote interface.
(DISP:TEXT command) overrides the display state. This means that you can
display a message even if the display is disabled (remote interface errors are
always displayed even if the display is disabled).
reset (*RST command), or when you return to local (front panel) operation.
Press the key or execute the IEEE-488 GTL (Go To Local) command
from the remote interface to return to the local state.
command. When you recall the instrument state using *RCL command, the
front-panel display will return to the previous state.
Keysight 33210A User's Guide