Keysight Technologies 33210A User Manual page 149

Host Name (LAN)
A host name is the host portion of the domain name, which is translated into an IP
address.
– Contact your network administrator for the correct host name.
– Enter the host name using the knob and cursor keys. Each character in the
– The host name is stored in non-volatile memory and does not change when
– Front panel operation: Press
– There is no SCPI command to set a host name.
Keysight 33210A User's Guide
name can be a letter ("a" through "z"), number, or dash ("_").
– Use the knob to select each character.
– Use the cursor key to move to the next character.
– You can use the keypad for numbers.
– Use the key to delete all characters to the right, starting at the cursor
position.
power has been off or after a remote interface reset.
Mod ify Settings, followed by DNS Setup. The Host Name field appears. Enter
the host name.
Features and Functions
and press the I/O softkey. Select LAN, then
3
149