To Configure the Remote Interface
The Keysight 33210A supports remote interface communication using a choice of
three interfaces: GPIB, USB, and LAN (LXI Class C compliant). All three interfaces
are "live" at power up. The following sections tell how to configure the remote
interface from the instrument front panel.
Two CDs, provided with your instrument, contain connectivity software to enable
NOTE
communications over the remote interfaces. See
Product CDs"
software they contain.
GPIB Configuration
You need only select a GPIB address.
1 Select the "I/O" menu.
2 Set the GPIB address.
3 Exit the menu.
Keysight 33210A User's Guide
on page 143, for further information on these CDs and the
Press
and then press the I/O softkey.
Use the knob and cursor keys or the numeric keypad to select a GPIB address
in the range 0 through 30 (the factory default is "10").
The GPIB address is shown on the front-panel display at power-on.
Press the DONE softkey.
Front-Panel Menu Operation
"Connectivity Software and
2
59