To Set Remote Display Mode; To Save/Recall All Setup Information; To Enable/Disable Media Transfer Protocol For Easy File Access - Keysight Technologies B2961A User Manual

To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.

To Set Remote Display Mode

1. Press the More > Display function keys.
2. Press Remote.
3. To enable the screen display in remote mode, press ON. To disable it, press OFF.
To cancel the setting change, press the Cancel/Local key.

To Save/Recall All Setup Information

This function saves/recalls all setup information of the B2900. For this function,
five storage areas are available in the built-in non-volatile memory (NVRAM).
To save the setup information, do the following steps.
1. Press the Config > Save function keys.
2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage area.
To recall the setup information, do the following steps.
1. Press the Config > Recall function keys.
2. Press a function key #1, #2, #3, #4, or #5 corresponding to the storage area
which stores the setup information to recall.
To Enable/Disable Media Transfer Protocol for Easy
File Access
For details on this function, see
6-31.
1. Press the More > I/O > USB function keys. The USB Status dialog box opens.
2. Set the Easy File Access field to ON (enable) or OFF (disable).
3. To apply the settings and close the dialog box, press OK.
To cancel the setting change, press the Cancel/Local key.
Keysight B2961A/B2962A User's Guide, Edition 3
To Use Functions other than Measurement
"File Access Function (Easy File Access)" on page
Front Panel Operations
5-9