Keysight Technologies 33210A User Manual page 265

SYSTem:COMMunicate:LAN:TELNet:WMESsage <string>
SYSTem:COMMunicate:LAN:TELNet:WMESsage?
Sets the welcome message seen when using a Telnet session to communicate
with the 33210A. The default welcome message is
– The 33210A uses LAN port 5024 for Telnet sessions.
– The message is a quoted string of up to 63 characters.
– The welcome message is stored in non-volatile memory, and does not change
LAN Port Usage
The Keysight 33210A uses LAN port 5024 for Telnet sessions, but uses LAN port
5025 for Socket sessions. For further information on socket sessions, see the
white paper "Socket Connections for LAN-enabled Instruments" found on the
Keysight 33210A Product Reference CD.
Keysight 33210A User's Guide
"Welcome to Keysights 33210A Waveform Generator".
when power has been off, or after an instrument reset (*RST).
Remote Interface Reference 4
265