Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Keysight Technologies M8195A
Summary of Contents for Keysight Technologies M8195A
- Page 1 Keysight M8195A Arbitrary Waveform Generator Revision 2 Getting Started Guide...
- Page 2 THER EXPRESS OR IMPLIED, WITH without prior agreement and written con- software under the same terms by which REGARD TO THIS MANUAL AND sent from Keysight Technologies, Inc. as the software is customarily provided to ANY INFORMATION CONTAINED governed by United States and interna- the public.
- Page 3 Verify that all safety precautions are taken including those defined for the mainframe. Line Power The Keysight M8195A operates when installed in an Keysight AXIe mainframe. Requirements Do Not Operate in an Do not operate the instrument in the presence of flammable gases or fumes.
- Page 4 Safety Symbols Table 1 Safety Symbol Symbol Description Indicates warning or caution. If you see this symbol on a product, you must refer to the manuals for specific Warning or Caution information to avoid personal injury or damage to the product. C-Tick Conformity Mark of the Australian ACA for EMC compliance.
-
Page 5: Table Of Contents
AXle Chassis ESM Front Panel Connector M8195A Maintenance ESD Protection Power and Ventilation Requirements 27 Thermal Protection Battery 27 Cleaning Recommendation 27 Characteristics Performance Specification 29 Operating Environment General 29 Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide... - Page 7 Getting Started Guide Introduction Introduction The Keysight M8195A is a 65 GSa/s Arbitrary Waveform Generator with highest bandwidth and channel density. It offers up to 16 GSa waveform memory. The M8195A is ideally suited to address following key applications: •...
- Page 8 1 Introduction The M8195A is an arbitrary waveform generator with highest sample rate, Features and bandwidth, and channel density: Benefits • Sample rate up to 65 GSa/s (on each channel) • Analog bandwidth: 20 GHz • Vertical resolution: 8 bits •...
- Page 9 Introduction 1 Getting Started with The M8195A is a modular instrument packaged in the AXIe form factor. AXIe is an M8195A open standard for high-performance modular instrumentation. Different form factors of AXIe chassis are available: 13-slot, 5-slot and 2-slot AXIe chassis.
- Page 10 2-slot chassis related documentation. • http://www.keysight.com/find/M9048A for PCIe desktop adapter card related documentation. • http://www.keysight.com/find/M9536A for embedded AXIe controller related documentation. • http://www.keysight.com/find/M8195A for AXIe based AWG module related documentation. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
-
Page 11: Pre-Requisites
Installation Pre-Requisites Installation Process Post Installation Steps How to use the Instrument This chapter explains the steps required to install M8195A Revision 2 software package. 2.1 Pre-Requisites The following are the pre-requisites for installing Keysight M8195A Revision 2 software: •... -
Page 12: Installation Process
2 M8195A Software Installation 2.2 Installation Process Follow the given steps to install Keysight M8195A software on your system: Double-click the executable (M8195_Setup.exe). This executable file is available either on CD or Web. The installer will first check and list some pre-requisites. Click Install to install them. - Page 13 M8195A Software Installation 2 Click Next. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 14 We recommend you to read the document to check if your hardware configuration is supported. Click Next to proceed to the license agreements. Accept the terms of ‘Keysight Software End-User License Agreement’. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 15 M8195A Software Installation 2 Click Next. Accept the ‘Keysight IVI Driver Source Code License Agreement Terms’. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 16 2 M8195A Software Installation Click Next. Select Yes if you want to read the post-installation instructions. Click Next to select setup type. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 17 M8195A Software Installation 2 10. Select a setup type either Complete or Custom. If you select Custom, you can specify which optional features will be installed. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 18 2 M8195A Software Installation 11. Click Next. 12. Click Install to begin the installation. The Setup Wizard will now install M8195 beginning with USB driver installation. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 19 M8195A Software Installation 2 13. The Keysight M8195A will configure the new software installation. 14. The following screen will appear once the Keysight M8195A software is successfully installed on your system. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
- Page 20 15. Click Finish to restart your system. Do not connect the AXIe chassis to your system using the PCIe or USB cable during this reboot. This completes the Keysight M8195A software installation. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide...
-
Page 21: Post Installation Steps
Follow the post installation steps as shown below: If M8195A is already powered up and connected to PC using the PCIe, just reboot the PC and start with step 5. No such reboot step is required in case of USB connection. -
Page 22: How To Use The Instrument
Expert (TCPIP0::localhost::…) and control it using SCPI (with e.g. the VISA Assistant or your own application). You must start the M8195A Soft Front Panel in order to send SCPI commands to the instrument. The M8195 IVI Drivers start the M8195A Soft Front Panel automatically. -
Page 23: Esm Front Panel Connector
Generator Getting Started Guide AXle Chassis ESM Front Panel Connector Introduction This chapter describes the usage of the AXIe chassis in combination with the M8195A. The detailed documentation for the AXIe chassis can be found at: • http://www.keysight.com/find/M9514A for 13-slot chassis •... - Page 24 Multiframe Output Trigger In External Trigger connections. The Trigger In of the AXIe ESM cannot be used to trigger the M8195A. Trigger Out The M8195A has its own Trigger In. The Trigger Out of the AXIe ESM cannot be controlled by the M8195A.
-
Page 26: Esd Protection
M8195A Maintenance ESD Protection Power and Ventilation Requirements Thermal Protection Battery Cleaning Recommendation Introduction This chapter explains how to install and maintain the M8195A. It covers the following topics: • ESD Protection • Power & Ventilation Requirements • Thermal Protection •... -
Page 27: Power And Ventilation Requirements
To prevent electrical shock, disconnect the instrument from mains before cleaning. Use a dry cloth or one slightly dampened with water to clean external case parts. Do not attempt to clean internally. Keysight M8195A Revision 2 – Arbitrary Waveform Generator Getting Started Guide... -
Page 29: Performance Specification
Generator Getting Started Guide Characteristics Performance Specification Operating Environment General 5.1 Performance Specification The performance specification can be found in the Data Sheet of the M8195A at: http://www.keysight.com/find/M8195A 5.2 Operating Environment Storage Temperature −40 °C to +70 °C Operating Temperature 0 °C to 40 °C... - Page 31 Keysight M8195A Revision 2 – Arbitrary Waveform Generator Generator Getting Started Guide This information is subject to change without notice. © Keysight Technologies 2017 Edition 3.0, October 2017 Printed in Malaysia www.keysight.com...
Need help?
Do you have a question about the M8195A and is the answer not in the manual?
Questions and answers