Keysight Technologies 33210A User Manual page 50

2 Front-Panel Menu Operation
4 Set the mod ulating frequency.
5 Select the mod ulating waveform shape.
6 View the waveform.
50
Press the AM Freq softkey and then set the value to 200 Hz using the numeric
keypad or the knob and cursor keys.
Press the Shape softkey to select the shape of the modulating waveform. For
this example, select a sine wave.
At this point, the function generator outputs an AM waveform with the
specified modulation parameters (if the output is enabled).
Press to view the waveform parameters.
To turn off the Graph Mode, press again.
Keysight 33210A User's Guide