Keysight Technologies 33210A User Manual page 150

3 Features and Functions
Domain Name (LAN)
A domain name is a registered name on the Internet, which is translated into an IP
address.
– Contact your network administrator for the correct domain name.
– Enter the domain name using the knob and cursor keys. Each character can be
– The host name is stored in non-volatile memory and does not change when
– Front panel operation: Press
– There is no SCPI command to set a domain name.
DNS Server (LAN)
DNS (Domain Name Service) is an Internet service that translates Domain names
into IP addresses. The DNS server address is the IP address of a server that
performs this service.
– Contact your network administrator to find out whether DNS is being used,
– Enter the address using the numeric keypad (not the knob).
– The DNS server address is stored in non-volatile memory and does not change
– Front panel operation: Press
– There is no SCPI command to set a DNS server address.
150
a letter ("a" through "z"), number, dash ("_"), or period (".").
– Use the knob to select each character.
– Use the cursor key to move to the next character.
– You can use the keypad for numbers.
– Use the key to delete all characters to the right, starting at the cursor
position.
power has been off or after a remote interface reset.
Mod ify Settings, followed by DNS Setup. Then select Domain Name and
enter the domain name.
and for the correct DNS server address.
when power has been off or after a remote interface reset.
Mod ify Settings, followed by DNS Setup. Then select DNS Server and enter
the server address.
and press the I/O softkey. Select LAN, then
and press the I/O softkey. Select LAN, then
Keysight 33210A User's Guide