Table of Contents
Advertisement
3
Features and Functions
To Create and Store an Arbitrary Waveform
This section gives an example which shows you how to create and store an
arbitrary waveform from the front panel. To download an arbitrary waveform from
the remote interface, see
this example, you will create and store the ramp waveform shown below using
four waveform points.
Vol t/Div = 1 Vol t
Time/Div = 1 ms
1 Select the arbitrary waveform function.
2 Start the arbitrary waveform ed itor.
3 Set the waveform period.
128
2
3
When you press
displayed indicating which waveform is currently selected.
Press the Create New softkey to start the waveform editor. While in the
waveform editor, you define the waveform by specifying time and voltage
values for each point in the waveform. When creating a new waveform, the
previous waveform in volatile memory is overwritten.
Press the Cycle Period softkey to set the time boundaries for the waveform. The
time value of the last point that can be defined in the waveform must be less
than the specified cycle period.
Arbitrary Waveform Commands
4
to select the arbitrary function, a temporary message is
starting on page 171. For
1
Keysight 33210A User's Guide
Advertisement
Table of Contents
