Keysight Technologies 33210A User Manual page 309

-221
Settings conflict;
offset changed d ue to amplitude
The relationship between offset voltage and output amplitude is shown below.
Vmax is the maximum peak voltage for the selected output termination (5 volts for
a 50Ω load or 10 volts for a high-impedance load). If the existing offset voltage is
not valid, the function generator will automatically adjust it to the maximum
dc voltage allowed with the amplitude specified.
-221
Settings conflict;
amplitude changed d ue to offset
The relationship between output amplitude and offset voltage is shown below.
Vmax is the maximum peak voltage for the selected output termination (5 volts for
a 50Ω load or 10 volts for a high-impedance load).
If the existing amplitude is not valid, the function generator will automatically
adjust it to the maximum value allowed with the offset voltage specified.
-221
Settings conflict;
low level changed d ue to high level
You can set the levels to a positive or negative value, but note that the high level
must always be greater than the low level. If you specify a high level that is less
than the existing low level, the function generator will automatically set the low
level to be 1 mV less than the high level.
Keysight 33210A User's Guide
| Voffset | < Vmax –
Vpp < 2 × (Vmax – | Voffset |)
Vpp
- - - - - - - -
2
Error Messages
309
5