Keysight Technologies 33210A User Manual page 151

Web Password (LAN)
You can set a password to control access to your instrument via the Web
Interface. The default is no password.
– Enter the password using the knob and cursor keys. Each character must be a
– Front panel operation: Press
– There is no SCPI command to set the password.
Current Configuration (LAN)
Select the Currently Active Settings display to view the MAC address and current
LAN configuration.
– Front panel operation: Press
– There is no SCPI command to display the configuration screen.
This display reflects only the settings that are currently active.
NOTE
If you have changed any LAN settings, you must first cycle the power to activate
the settings, then select Current Config. Also, this display is static. It does not
update information for events that have occurred after the information is
displayed. For example, if DHCP assigns an IP address while the display is open,
you will not see the new IP address until you press the Refresh button.
Keysight 33210A User's Guide
letter ("a" through "z").
– Use the knob to select each character.
– Use the cursor key to move to the next character.
– Use the key to delete all characters to the right, starting at the cursor
position.
Mod ify Settings. The Password field appears. Enter the desired password.
then select Current Config. Use the "arrow" softkeys to scroll the list.
Features and Functions
and press the I/O softkey. Select LAN, then
and press the I/O softkey. Select LAN, and
3
151