Keysight Technologies 33210A User Manual page 303

Error Messages 5
-221
Settings conflict;
not able to burst this function
The function generator cannot generate a burst using the pulse, noise, dc voltage,
or arbitrary waveform functions.
-221
Settings conflict;
not able to mod ulate noise, mod ulation turned off
The function generator cannot generate a modulated waveform using the noise
function. The selected modulation mode has been turned off.
-221
Settings conflict;
not able to mod ulate arb waveforms, mod ulation turned off
The function generator cannot generate a modulated waveform using the
arbitrary waveform function. The selected modulation mode has been turned off.
-221
Settings conflict;
not able to mod ulate ramp waveforms, mod ulation turned off
The function generator cannot generate a modulated waveform using the ramp
function. The selected modulation mode has been turned off.
-221
Settings conflict;
not able to sweep pulse, sweep turned off
The function generator cannot generate a sweep using the pulse function. The
sweep mode has been turned off.
-221
Settings conflict;
not able to mod ulate dc, mod ulation turned off
The function generator cannot generate a modulated waveform using the
dc voltage function. The selected modulation mode has been turned off.
Keysight 33210A User's Guide 303