Keysight Technologies 33210A User Manual page 277

The Standard event register is cleared when:
– You execute the *CLS command.
– You query the event register using the *ESR? command.
The Standard Event enable register is cleared when:
– You execute the *ESE 0 command.
– You turn the power on and have previously configured the function generator
Keysight 33210A User's Guide
to clear the enable register using the *PSC 1 command. Note that the enable
register will not be cleared at power-on if you have configured the function
generator using the *PSC 0 command.
Remote Interface Reference 4
277