Keysight Technologies 33210A User Manual page 132

3 Features and Functions
11 Store the arbitrary waveform in memory.
132
Press the End / Store softkey to store the new waveform in memory.
Then press the DONE softkey to store the waveform in volatile memory or
press the Store in Non-Vol softkey to store the waveform in one of four
non-volatile memory locations.
You can assign a custom name to the four non-volatile memory locations.
– The custom name can contain up to 12 characters. The first character must
be a letter but the remaining characters can be letters, numbers, or the
underscore character (" _ ").
– To add additional characters, press the right-cursor key until the cursor is
to the right of the existing name and then turn the knob.
– To delete all characters to the right of the cursor, press the
For this example, assign the name "RAMP_NEW" to memory location 1 and
then press the STORE ARB softkey to store the waveform.
The waveform is now stored in non-volatile memory and is currently being
output from the function generator. The name that you used to store the
waveform should now appear in the list of stored waveforms (under the Stored
Wform softkey).
key.
Keysight 33210A User's Guide