Applying Dc Output - Keysight Technologies B2961A User Manual

Applying DC Output

B2961A/B2962A can be used as a DC current or voltage source. The following
procedure configures B2961A/B2962A as a voltage source and applies a voltage of
+0.5 V.
Step 1. Press the
Step 2. Setting the Source mode (voltage output)
1. Press the
Mode
model.
The field pointer appears on the Source mode, and the status changes to EDIT
(green). The status information will show
2. Press the
VOLTS (V)
and
The status changes to MOVE (blue). The status information will show
Step 3. Setting the Source value (voltage output value)
1. Press the
Source
2-ch model. Or, use the rotary knob or arrow keys to move the field pointer onto
the Source value and press the knob. The field pointer appears on the Source
value, and the status changes to EDIT (green).
2. Turn the rotary knob clockwise to increase the value, or counter clockwise to
decrease the value. Set the desired value.
When you press an arrow key, a digit pointer will appear on a digit. Turning the
knob will change the value of the digit or move the decimal point if the pointer is
on it.
3. Press the rotary knob to fix the value. The status changes to MOVE (blue).
Keysight B2961A/B2962A User's Guide, Edition 3
key to display the Single view or Dual view.
assist key on a 1-ch model, or the
assist key. Or use the rotary knob or arrow keys
to specify the mode, and press the knob to fix the setting.
assist key on a 1-ch model, or the
Getting Started
Applying DC Output
assist key on a 2-ch
Ch1 Mode
.
assist key on a
Ch1 Source
.
1-3