Ip Connection Via Usb - WAGO Compact Controller 100 Manual

80 Commissioning
8.3.1

IP Connection via USB

You can establish an IP connection via USB for commissioning and for service
purposes.
1. Connect the controller to your PC via the USB service interface and a USB
service cable.
2. If you are using Windows 10, go to step 4.
In Windows 7, the controller behaves like an external drive after
connection. A driver for the IP connection via USB is stored on the drive.
3. Install this driver.
Communication is then possible via the IP connection via USB.
4. Call up the fixed IP address 192.168.42.42 in the browser.
The Web-Based Management of the controller opens. You can use it to
make all the necessary settings on the controller.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
WAGO I/O System Compact
751-9301 Compact Controller 100