Subscribe to Our Youtube Channel
Related Manuals for WAGO 750-626
Summary of Contents for WAGO 750-626
- Page 1 Fieldbus Independent I/O Modules 24 V DC Power Supply Filter with Overvoltage (Surge) Protection 750-626 Manual Version 1.0.2...
- Page 2 • General Copyright © 2006 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...
-
Page 3: Table Of Contents
Number Notation..................5 Safety Notes ..................... 6 Scope ......................6 2 I/O Modules ....................7 System Modules ..................7 2.1.1 750-626 [24 V DC Power Supply Filter with Overvoltage (Surge) Protection] ................... 7 2.1.1.1 View....................7 2.1.1.2 Description..................7 2.1.1.3 Display Elements ................ -
Page 4: Important Comments
WAGO Kontakttechnik GmbH & Co. KG declines all liability resulting from improper action and damage to WAGO products and third party products due to non-observance of the information contained in this manual. -
Page 5: Symbols
Routines or advice for efficient use of the device and software optimization. More information References on additional literature, manuals, data sheets and INTERNET pages 1.3 Number Notation Number Code Example Note Decimal normal notation Hexadecimal 0x64 C notation Binary '100' Within ', '0110.0100' Nibble separated with dots WAGO-I/O-SYSTEM 750 I/O Modules... -
Page 6: Safety Notes
(persons, workplace and packing) is well grounded. Avoid touching conductive components, e.g. gold contacts. 1.5 Scope This manual describes the System Module 750-626 24 V DC Power Supply Filter with Overvoltage (Surge) Protection of the modular WAGO-I/O-SYSTEM 750. Handling, assembly and start-up are described in the manual of the Fieldbus Coupler. -
Page 7: O Modules
2.1.1.2 Description The overvoltage protection module 750-626 is used to supply a fieldbus node. This module has a filter for the 24 V system power supply and is equipped with surge suppression for both the system and field side power supply via power jumper contacts. -
Page 8: Display Elements
The maximum current of the filter module is 10 A. When configuring the system it is important not to exceed the maximum/sum current. However, if such a case should occur, another supply module must be added. The filter module 750-626 can be used with all couplers/controllers of the WAGO-I/O-SYSTEM 750. 2.1.1.3... -
Page 9: Technical Data
750-626 [24 V DC Power Supply Filter with Overvoltage (Surge) Protection] • 9 Technical Data 2.1.1.5 Technical Data Module Specific Data Voltage via power jumper contacts DC 24 V (-25% ... +30%) max. Current via power jumper contacts 10 A max. -
Page 10: Power Supply Concept
10 • 750-626 [24 V DC Power Supply Filter with Overvoltage (Surge) Protection] Power supply concept 2.1.1.6 Power supply concept The following illustration shows the power supply concept of a WAGO-I/O-SYSTEM 750 fieldbus node for the certified application according to GL / LR. - Page 11 750-626 [24 V DC Power Supply Filter with Overvoltage (Surge) Protection] • 11 Power supply concept WAGO-I/O-SYSTEM 750 I/O Modules...
- Page 12 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 – 0 Fax: 05 71/8 87 – 1 69 E-Mail: info@wago.com Internet: http://www.wago.com...
Need help?
Do you have a question about the 750-626 and is the answer not in the manual?
Questions and answers