Inserting Devices; Inserting The Controller; Wago Picomax ® Connectors; Status At Delivery - WAGO Compact Controller 100 Manual

72 Mounting
6.4

Inserting Devices

Do not work when devices are energized!
High voltage can cause electric shock or burns.
Switch off all power to the device prior to performing any installation, repair or
maintenance work.
6.4.1

Inserting the Controller

Snap the controller onto the DIN-rail.
The DIN-rail release tab automatically jumps back into the housing once the
controller is locked onto the DIN-rail.

Figure 9: Insert Controller

6.4.2 WAGO picoMAX
WAGO's picoMAX
expedite device installation and avoid rewiring during device replacement.
WAGO picoMAX
female connector (pluggable).
Additional information on picoMAX
Pluggable Connection System" or online at www.wago.com.
6.4.2.1

Status at delivery

When delivered, the female connectors are not plugged into the device, but
included.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
Connectors
®
pluggable connectors enable you to prewire devices to
®
connectors consist of a male header (fixed in the device) and a
®
is available in the catalog "picoMAX
®
WAGO I/O System Compact
751-9301 Compact Controller 100
‒ The
®