Configuration Of Connection <N>" Page; Table 102: Wbm "Configuration Of Connection <N>" Page - "Configuration - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
15.1.1.2.20 "Configuration of Connection <n>" Page
You can find settings and information for cloud access on the "Configuration of
Connection <n>" page.
A page is displayed for each cloud access.
"Configuration" Group
The parameters indicated depend on the cloud platform setting and, if applicable,
on other settings in this group.
The dependencies are shown in a separate table.
Table 102: WBM "Configuration of Connection <n>" Page – "Configuration" Group
Parameter
Enabled
Cloud platform
Hostname
Port number
Device ID
Client ID
Authentication
Activation Key
Clean Session
TLS
CA file
Users
Password
Explanation
You can enable/disable the cloud connectivity
function.
Select the cloud platform.
Enter the host name or IP address for the selected
cloud platform.
Enter the port here to which a connection is to be
established.
Typical values are 8883 for encrypted connections
and 1883 for unencrypted connections.
Enter the device ID for the selected cloud platform.
Enter the client ID for the selected cloud platform.
Select the authentication method.
Possible settings are "Shared Key Access" or "X.509
Certificate".
Enter the activation key for the selected cloud
platform.
Specify whether clean session should be enabled
during the connection to the cloud service. If clean
session is enabled, the information and messages
on this connection are not stored persistently on the
cloud service.
You can specify whether TLS encryption should be
used for the connection to the cloud platform.
Amazon Web Services (AWS) always uses TLS.
Enter the path here to the file encoded in PEM
format that contains the trusted CA certificate to use
to establish an encrypted connection. The default
value is the CA certificate /etc/ssl/certs/ca-
certificates.crt that is already installed on the
controller.
Enter the user name for cloud service
authentication.
Enter the password for cloud service authentication.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 167
Manual