Memory Card Slot - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
4.1.6

Memory Card Slot

The slot for the SD memory card is located on the front of the housing. The
memory card is locked in the enclosure by a push/push mechanism. Inserting
and removing the memory card is described in the Section "Service" > "Inserting
and Removing the Memory Card."
The memory card is protected by a cover flap. The cover cap is sealable.
Memory card is not included in the scope of delivery!
Note, the controller is delivered without memory card.
To use a memory card, you must order one separately. The controller can also
be operated without memory card expansion, the use of a memory card is
optional.
</dg_
Only use recommended memory card!
Use only the SD memory card available from WAGO (item No. 758-879/000-
001) as it is suitable for industrial applications subjected to environmental
extremes and for use in this device.
Compatibility with other commercially available storage media cannot be
guaranteed.
Version 1.1.0, valid from FW Version 03.08.07(20)
Properties 35
Manual