Clock; Programming; Ethernet; Table 21: Technical Data - Clock - WAGO Compact Controller 100 Manual

38 Properties
Buffer for system power supply!
The system power supply and, if necessary, the field supply must be buffered to
bridge power outages.
As the power demand depends on the respective node configuration, buffering is
not implemented internally.
To achieve power outages of 1 ms to 10 ms according to IEC61131-2, determine
the buffering appropriate for your node configuration and structure it as an
external circuit.
4.3.4

Clock

</dg_
Table 21: Technical Data – Clock
Buffer time RTC (25 °C)
4.3.5

Programming

Table 22: Technical Data – Programming
Programming
IEC 61131-3
e!RUNTIME memory configuration
Program memory (flash)
Data memory (RAM)
Non-volatile memory (NVRAM,
Retain + Flags)
4.3.6

ETHERNET

Table 23: Technical Data – ETHERNET
ETHERNET
Transmission medium
Baud rate
Protocols
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
6 days
CODESYS V3
e!RUNTIME
LD, FBD, ST, FC
32 MByte
128 MByte
128 kByte
2 x RJ-45 (switched or separated mode)
Twisted Pair S-UTP, 100 Ω, Cat 5,
100 m maximum cable length
10/100 Mbit/s; 10Base-T/100Base-TX
DHCP, DNS, SNTP, FTP, FTPS (only
explicit connections), SNMP, HTTP,
HTTPS, SSH, Modbus (TCP)
WAGO I/O System Compact
751-9301 Compact Controller 100