Technical Condition Of Specified Devices - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
The operation of the product in residential areas without further measures is only
permitted if the product complies with the emission limits (interference emissions)
according to EN 61000-6-3.
Operating the product in home applications without further measures is only
permitted if it meets the emission limits (emissions of interference) according to
EN 61000-6-3. Please observe the installation regulations!
You will find the relevant information in the section "Device Description" >
"Standards and Guidelines" in the manual for the used product.
2.1.4

Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO GmbH
& Co. KG:
• Repairs,
• Changes to the hardware or software that are not described in the
operating instructions,
• Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO GmbH & Co. KG.
Version 1.1.0, valid from FW Version 03.08.07(20)
Important Notes 15
Manual