Table of Contents
Advertisement
WAGO I/O System Compact
751-9301 Compact Controller 100
15.1.1.2.9 "Firmware Restore" Page
The settings for restoring the controller data are shown on the "Firmware
Restore" page.
"Firmware Restore" Group
Table 82: WBM "Firmware Restore" Page – "Firmware Restore" Group
Parameter
Source
Boot Device
PLC runtime project
Settings
System
Decryption
Decryption passphrase
Note the firmware version!
Restoring the controller operating system ("System" selection) is only permissible
and possible if the firmware versions at the backup and restore times are
identical.
If necessary, skip restoring the controller operating system, or match the
firmware version of the controller to the firmware version of the backup time
beforehand.
Explanation
Select the data source for the restore here.
The data is read from the memory
card.
This selection is only enabled if a
Memory Card
memory card is inserted and the
device has not been booted from
the memory card.
The data is uploaded from the PC
Network
and restored.
The storage medium from which the device was
booted is displayed here.
Enter the name of the backup file for the CODESYS
project here.
The input field only appears if the network is
selected as the data source.
Enter the name of the backup file for the settings
here.
The input field only appears if the network is
selected as the data source.
Enter the name of the backup file for the system
data here.
The input field only appears if the network is
selected as the data source.
If you have backed up the data in encrypted form,
select this checkbox.
Enter the encryption password here.
This input field only appears if the "Decryption"
checkbox is selected.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 153
Manual
Advertisement
Chapters
Table of Contents
