WAGO Compact Controller 100 Manual page 175

WAGO I/O System Compact
751-9301 Compact Controller 100
Table 107: WBM "Configuration of SNMP v3" Page – "Actually configured v3 Users" Group
Parameters
Authentication Type
Authentication Key (min. 8
char.)
Privacy
Privacy Key (min. 8 char.)
Notification Receiver IP
Click the respective [Delete] button to delete an existing user.
Click [Add] to add a new user.
The changes only take effect after the controller restarts. For this purpose, use
the WBM reboot function. Do not shut down the controller too early!
Meaning
Specify the authentication type for the SNMP v3
packets.
Possible values:
- Use no authentication ("None")
- Message Digest 5 ("MD5")
- Secure Hash Algorithm ("SHA")
Specify the authentication key. The key must be
min. 8 and max. 32 characters long and contain
lower case letters (a ... z), upper case letters
(A ... Z), numbers (0 ... 9), special characters !()*~'.-
_ but no spaces.
Specify the encryption algorithm for the SNMP
message.
Possible values:
- No encryption ("None")
- Data Encryption Standard ("DES")
- Advanced Encryption Standard ("AES")
Enter the key for encryption of the SNMP message.
If nothing is specified here, the "authentication key"
is automatically used. The key must be min. 8 and
max. 32 characters long and contain lower case
letters (a ... z), upper case letters (A ... Z), numbers
(0 ... 9), special characters !()*~'.-_ but no spaces.
Specify an IP address for a trap receiver for v3
traps. If no v3 traps are to be sent for this user, this
field remains blank.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 175
Manual