Table 117: Wbm "Configuration Of Mac Address Filter" Page - "Mac Address Filter State Bridge <N>" Group; Table 118: Wbm "Configuration Of Mac Address Filter" Page - "Mac Address - WAGO Compact Controller 100 Manual

184 Appendix
"MAC address filter state Bridge <n>" Group
A separate group is displayed for each configured bridge.
Table 117: WBM "Configuration of MAC Address Filter" Page – "MAC address filter state Bridge <n>"
Group
Parameter
Filter enabled
Click the [Submit] button to apply the change. The change takes effect
immediately.
"MAC address filter whitelist" Group
Each list entry has its own area in the display.
Table 118: WBM "Configuration of MAC Address Filter" Page – "MAC address filter whitelist" Group
Parameters
MAC address
MAC mask
Filter enabled
Add filter to whitelist
MAC address
MAC mask
Filter enabled
Click the [Submit] button to apply the change. The change takes effect
immediately.
Click the appropriate [Delete] button to remove an existing list entry. The change
takes effect immediately.
Click [Add] to accept a new list entry. You can enter 10 filters. The change takes
effect immediately.
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
751-9301 Compact Controller 100
Explanation
Enable or disable here the MAC address filter for the
specific bridge.
Explanation
Displays the MAC address of the relevant list entry.
This displays the MAC mask of the relevant list
entry.
Enable or disable the filter for the relevant list entry.
Create a new list entry.
Enter here the MAC address for a new list entry.
You can enter 10 filters.
Enter the MAC mask for the new list entry.
Enable or disable the filter for the new list entry.
WAGO I/O System Compact