Configuration - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
8.8

Configuration

Check firmware version and update if required!
At the beginning of initial configuration check to ensure that you have the latest
firmware version for the controller.
The firmware version installed on the controller is given on the WBM page
"Status Information".
Perform an update to install the latest firmware version.
To do this, follow the instructions given in section "Service" > "Firmware
Changes" > "Perform Firmware Upgrade".
The following methods are available for configuring the controller:
• Access to the Web-based management system via the PC using a web
browser (section "Configuration Using Web-Based Management [WBM]")
• Access via the PC using "WAGO Ethernet Settings" (section "Configuration
Using 'WAGO Ethernet Settings'").
Version 1.1.0, valid from FW Version 03.08.07(20)
Commissioning 91
Manual