Configuration Of User Filter" Page; Table 119: Wbm "Configuration Of User Filter" Page - "User Filter" Group - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100

15.1.1.4.5 "Configuration of User Filter" Page

The "Configuration of User Filter" page displays the settings for custom firewall
filters.
"User filter" Group
Each configured filter has its own area in the display.
Table 119: WBM "Configuration of User Filter" Page – "User Filter" Group
Parameters
Policy
Source IP address
Source Netmask
Source Port
Destination IP address
Destination Netmask
Destination Port
Protocol
Input interface
Add new user filter
Policy
Source IP address
Source netmask
Source port
Destination IP address
Destination subnet mask
Destination port
Meaning
This displays whether the network participant is
permitted or excluded by the filter.
The source IP address for the respective filter is
displayed.
This displays the source netmask for the respective
filter.
The source port number for the respective filter is
displayed.
The destination IP address for the respective filter is
displayed.
The destination netmask for the respective filter is
displayed.
The destination port number for the respective filter
is displayed.
The permitted protocols for the respective filter is
displayed.
The permitted interfaces for the respective filter are
displayed.
You can create up to 10 filters.
You only have to enter values in the fields that are to
be set for the filter. At least one value must be
entered, all other fields can remain empty.
Select here whether the network devices is to be
allowed or excluded by the filter.
Allow The network device is permitted.
Drop The network device is excluded.
Enter here the source IP address for the new filter.
Enter here the source network mask for the new
filter.
Enter here the source port address for the new filter.
Enter here the destination IP address for the new
filter.
Enter here the destination network mask for the new
filter.
Enter here the destination port address for the new
filter.
Version 1.1.0, valid from FW Version 03.08.07(20)
Appendix 185
Manual