Analog Inputs And Outputs; Analog Inputs; Table 8: Digital Outputs - "X5; Table 9: Analog Inputs - "X14 - WAGO Compact Controller 100 Manual

WAGO I/O System Compact
751-9301 Compact Controller 100
Table 8: Digital outputs – "X5"
Contact
1
2
3
4
5
6
7
8
9
10
4.1.3.5

Analog inputs and outputs

The connectors are for connecting actuators and sensors.
picoMAX ®

4.1.3.5.1 Analog inputs

The controller processes signals with standardized values of 0 ... +10 V from the
field range.
The product has 2 input channels for field signals.
The sensors are connected to AI1 and ground or AI2 and ground in each case.
The ground connections are available for both channels on a common 0V ground
potential.
The input signal is transmitted at a resolution of 16 bits.
The internal power supply powers the module.
Table 9: Analog inputs – "X14"
Contact
1
2
3
4
Signal
U +
in
0V
DO1
0V
DO2
0V
DO3
0V
DO4
0V
plugs with push-in CAGE CLAMP
Signal
AI1
GND
AI2
GND
Version 1.1.0, valid from FW Version 03.08.07(20)
Properties
Description
Supply voltage input (DO1 ... DO4)
Ground
Digital output 1
Ground
Digital output 2
Ground
Digital output 3
Ground
Digital output 4
Ground
S connections are used.
®
Description
Analog input 1
Ground
Analog input 2
Ground
29
Manual