Firmware Changes - WAGO Compact Controller 100 Manual

116 Service
11.2

Firmware Changes

Do not switch the controller off!
The controller can be damaged by interrupting the factory reset process.
Do not switch the controller off during the factory reset process, and do not
disconnect the power supply!
Obtain documentation appropriate for the firmware target version!
A firmware change can modify, remove or add controller properties and
functions. As a result, described properties or functions of the controller may not
be available or available properties or functions may not be described in the
documentation.
Therefore, use only documentation appropriate for the target firmware after a
firmware change.
If you have any questions, feel free to contact our WAGO Support.
Note the firmware version!
The product is compatible from firmware 19.
A downgrade to a version ≤ firmware 19 is not permitted.
You can update the firmware in the following ways using:
• WAGOupload
• Memory card and WBM
Manual
Version 1.1.0, valid from FW Version 03.08.07(20)
WAGO I/O System Compact
751-9301 Compact Controller 100