Call Processing; System Hold; Exclusive Hold; Remote Hold - Samsung iDCS500 User Manual

Dcs (euro) keyset

Hide thumbs Also See for iDCS500:

Table of Contents

Samsung iDCS500

CALL PROCESSING

When you are connected to a call, press the HOLD key. The call will go

on hold and flash green at your keyset. If this call appears on a line key

at other keysets, it will flash red at those keysets.

To take the call off hold, press the flashing CALL key and the green light

will go steady green again. Resume your conversation.

Note: While on a call, pressing a line key, route key or a flashing CALL key will

automatically put your first call on hold and connect you to the new call. See

matic Hold

in the section "Customising Your Keyset".

To place an outside call on hold at your phone so that other users cannot

access it:

Press the HOLD key twice. The call will flash green on your keyset and

this line will show a steady red light on other keysets.

To retrieve the call, press the flashing green line key.

Note: Internal calls are always placed on exclusive hold.

When you wish to place a call on hold at another station.

1. Press TRSF and dial the extension number, or press the appropriate

DSS key.

2. Press the HOLD key. This will place the call on system hold on an avail-

able Call or line key at the remote station and return you to dial tone.

DCS (Euro) Keyset User Guide

– 16 –

Auto-

Table of Contents