MUTOH VJ-1204 User Maintenance And Cleaning Manual
Hide thumbs
Also See for VJ-1204:
- Operation manual (186 pages) ,
- User manual (121 pages) ,
- Quick reference (110 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for MUTOH VJ-1204
Summary of Contents for MUTOH VJ-1204
- Page 1 VJ-1204 User Maintenance and Cleaning Guide Page 1 of 9...
-
Page 2: Section 1: Intervals
Please refer to Section 4: Daily Maintenance of the Quick Reference Guide or Section 6: Maintenance of the Operation Manual CD, for complete step by step instructions for performing these items. Section 1: Intervals User Level Maintenance Intervals VJ-1204 1-2 times per week Once a week Every 1-2 Months □... -
Page 3: Section 3: Cleaning Procedures
Section 3: Cleaning Procedures ** Clean Wiper Do not touch Wiper. Oil from your hands may prevent the wiper from cleaning the head properly. 1. The wiper can be cleaned using either the foam swabs or the lint free cloth. Either Eco- cleaning solution or Isopropyl Alcohol may be used in conjunction with the cleaning utensil of choice.. - Page 4 3. Wipe the back of the wiper in a vertical motion. ** Clean around cap Do not touch the Rubber Cap. Oil from your hands may prevent the cap from sealing properly. 1. Using either a foam swab or a lint free cloth soaked in Eco-cleaning solution or Isopropyl Alcohol, wipe around the edges of the rubber cap.
- Page 5 ** Clean around Print Head CAUTION • When cleaning around Print Heads Do Not Touch the Bottom of the heads. Do Not Clean the Nozzle Surface with the cleaning device. Do not use water to clean the head. Nozzle clogging may occur Do Not Re-use dirty foam swabs or lint free cloths 1.
- Page 6 2. To clean behind the print head, position the foam swab parallel to the pressure roller and slide the swab behind the carriage. To clean either move the swab in a horizontal motion or move the carriage back and forth. Page 6 of 9...
- Page 7 3. Clean the front of the head in a horizontal motion. Page 7 of 9...
- Page 8 4. To clean the area between the head an the guide ramps, position the carriage such that it is just off the right side of the platen. Work the swab under the head, being especially careful not to touch the nozzle surface area. Print Head Guide Ramp Clean the space between the...