7 Adjustment
9. When [xxxxxx bytes recv (xx is numerical
value)] is displayed, installation is completed.
Pressing any key goes back to [Waiting for
command] status.
7.3.8
RTC Date & Time Setting
* Normally, this function is not used because this setting should be made in the "Time setting" of the self-
diagnosis function.
"5.10 Time Setting" p.5-46
This section describe the procedure to transfer time setting on a PC to the RTC (Real Time Clock) on the
MAIN board.
1. Click [Date & Time Install].
2. When the "Date & time installation check"
window opens, click [OK].
Installing will start.
Rev.-00
7-20
VJ-1604 Maintenance Manual