Removing Backup And Optical Disk Media; Verifying And Configuring The Backup Software Solution; Completing The Maintenance Task; Updating Or Recovering The Bios - Fujitsu PRIMERGY TX1310 M5 Upgrade And Maintenance Manual

5.1.2

Removing backup and optical disk media

▶ Ask the system administrator to eject all remaining backup or optical media
from the backup drive or ODD before removing it from the server.
▶ If the backup media cannot be ejected by conventional means, and it is
mandatory that the cartridge be removed prior to returning the drive for
repair or disposing it, a manual tape extraction needs to be performed.
Please contact Fujitsu support, if "forcible" tape ejection is necessary.
Fujitsu does not assume responsibility for any damage to the tape drive,
the data cartridge/tape or for the loss of any data resulting from manual
tape extraction procedures.
5.1.3 Verifying and configuring the backup software
solution
This task only applies to Japan.
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list before starting the
maintenance task.
For more information on suitable backup software solutions and related
documentation, see the Fujitsu web pages.
5.2

Completing the maintenance task

5.2.1

Updating or recovering the BIOS

After replacing the system board or a CPU, it is essential to upgrade the BIOS
to the latest version. The latest BIOS version are available from the Fujitsu
support internet pages at:
https://ts.fujitsu.com/support/
TX1310 M5 Upgrade and Maintenance Manual
Basic software procedures
63