Completing The Maintenance Task; Verifying System Information Backup Or Restore - Fujitsu PRIMERGY CX400 M6 Upgrade And Maintenance Manual

Basic software procedures
Using the Infrastructure Manager
▶ To switch on the ID indicator from the Infrastructure Manager, select a node
from the Node List screen and operate ID LED from the Action button.
5.2

Completing the maintenance task

5.2.1

Verifying system information backup or restore

System information, such as chassis type, serial number, and manufacturing
data, is stored in the Chassis FRU ROM on the power distribution board. To
avoid loss of system information when replacing the power distribution board, a
backup copy of the data is automatically stored in the system board ID
EPROM. After replacing the power distribution board, the backup data is
restored from the system board to the new power distribution board
automatically.
In order to verify whether the restore process has been successful, check the
System Event Log (SEL), see
(SEL)" on page 91.
When using the Infrastructure Manager, please refer to the following
manuals about backup and restore function of system information.
See manual "FUJITSU Software Infrastructure Manager Vx.x.x User's
Guide", section "2.10 Backup/Restore Hardware Settings", available at:
https://ts.fujitsu.com/support/
For Japan:
See manual "FUJITSU Software Infrastructure Manager Vx.x.x 解説書",
section "2.10 ハードウェア設定バックアップ／リストア機能", available at:
https://www.fujitsu.com/jp/products/software/infrastructure-software/
infrastructure-software/serverviewism/technical/
88
"Viewing and clearing the System Event Log
Upgrade and Maintenance Manual CX400 M6