Completing The Maintenance Task; Updating The Bios And Bmc - Fujitsu PRIMERGY GX2560 M7 Upgrade And Maintenance Manual

Using the UID button on the I/O panel
▶ Press the UID button on the I/O panel to switch on the blue light function of
the Information indicator on the front panel and the UID indicator on the I/O
panel.
For more information, see
5.2

Completing the maintenance task

5.2.1

Updating the BIOS and BMC

For Japan:
Follow the instructions provided separately.
After replacing the system board, memory or a CPU, it is essential to upgrade
the BIOS and BMC to the latest version. The latest BIOS and BMC versions
are available from the Fujitsu support internet pages at:
https://ts.fujitsu.com/support/
For Japan:
https://support.ts.fujitsu.com/IndexDownload.asp?lng=jp
Note on boot watchdog
Before updating or recovering the BIOS and BMC, ensure that the boot
watchdog is disabled, see
After updating or recovering the BIOS and BMC, ensure that the boot
watchdog is enabled, see
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
BIOS and BMC flash procedure using BMC web interface
Proceed the following steps to update the BMC firmware using BMC web
interface:
▶ Log in to the BMC web interface.
GX2560 M7
"Indicators on the front panel" on page
"Disabling the boot watchdog" on page
"Enabling the boot watchdog" on page
Upgrade and Maintenance Manual
Basic software procedures
313.
89.
94.
91