Canon imageRUNNER ADVANCE C3330 Series Service Manual page 105

No. Parts name
SW01 Waste Toner Container Detection
Switch
● Waste Toner Container Full Level Detection
Purpose
Toner level accumulated in the Waste Toner Container is detected.
Registration Motor
M17
Waste Toner Sensor
DC Controller PCB
Number of sheets
Detection de- Prior delivery alarm/Waste Toner Container preparation
scription
Detection timing When paper equivalent to approximately 3000 counts has been fed
since the Waste Toner Sensor PCB (UN30) output result changed
from ON to OFF
Detected to (loca- Waste Toner Sensor PCB (UN30) + video count, or the number of
tion) sheets fed
Message The waste toner is nearly full. (Replacement not yet needed.)
(Operation of the
host machine)
Alarm Codes 11-0010
*1: The Waste Toner Container preparation warning message can be set to be displayed or hidden using COPIER > OPTION >
DSPLY-SW > WT-WARN.
*2: The timing to display the preparation warning can be changed using COPIER > OPTION > CUSTOM > EXT-TBOX (the timing
to notify that the Waste Toner Container is full is also changed at the same time).
*3: The number of printed sheets differs according to the usage environment/usage conditions.
Related error code
• E013-0001: Waste Toner Feed Motor error
Related alarm codes
• 11-0001: Waste Toner Container full
• 11-0010: Display of Waste Toner Box preparation warning
Related service mode
• Display/hide the Waste Toner Container preparation message
COPIER > OPTION > DSPLY-SW > WT-WARN
• Setting of the Waste Toner Container preparation warning timing
COPIER > OPTION > CUSTOM > EXT-TBOX
● Detection of Completion of Waste Toner Replacement
Detection timing
If the Waste Toner Container is replaced after opening and closing the Cassette 1 while "preparation warning" or "full" is detected,
the Waste Toner Sensor PCB (UN30) detects that there is no waste toner.
This determines that replacement of the Waste Toner Container is complete.
Waste Toner Container detection
UN30
[ Toner low : SensorON ]
UN04
Video count
warning *1
*2*3
Role
[ Waste Toner Container
preparation warning
: Sensor OFF ]
When paper equivalent to approximately
2200 counts has been fed since the prepa-
ration warning
Video count value, or the number of sheets
fed
Replace the waste toner container. (Host
machine is stopped.)
11-0001
93
2. Technology
Waste Toner Container full
*3