Power Supply; Toner Safety; About Toner; Handling Adhered Toner - Canon imageRUNNER ADVANCE C3330 Series Service Manual

Hide thumbs Also See for imageRUNNER ADVANCE C3330 Series:

Table of Contents

Do not turn off the main power switch while the progress bar is indicated, during which access is made to the HDD. If

deprived of power, the HDD can suffer a fault (E602).

Power Supply

• As a general rule, do not use extension cords.

If an extension cord must be used, however, use one for local rated voltage and over, untie the cord binding, and insert the

power plug completely into the extension cord outlet to ensure a firm connection between the power cord and the extension

Do not plug multiple cords together to an extension cord. It may cause a fire or electrical shock.

• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Toner is a nontoxic matter composed of plastic, iron and a trace of pigments.

Never throw toner in flames to avoid explosion.

• Use dry tissue paper to wipe off toner adhered to skin or clothes and wash in water.

• Never use warm water for cleaning up toner to prevent toner particles from being gelated to soak into fibers permanently.

• Toner particles are reactive with vinyl polymers. Avoid contacting these materials.

Dispose of used batteries according to the instructions.

Safety Precautions