Canon imageRUNNER ADVANCE C3330 Series Service Manual page 169

1. Set the port numbers in the following service mode.
To set the HTTP server port
• (Level2) COPIER > Option > NETWORK > MEAP-PN
To set the HTTPS (SSL) server port
• (Level2) COPIER > Option > NETWORK > MEAP-SSL
NOTE:
A port number can be any integer from 0 to 65535. To avoid port numbers that are frequently used, do not use any integer from
0 to 1023.
Server
HTTP Server
HTTPS Server
NOTE:
• If Print Server is connected, do not specify port 8080. If port 8080 is specified, it is not possible to access the remote UI of
the device where the MEAP authentication application is running. (Port 8080 is reserved to allow the PS Print Server Unit to
redirect to the device.)
• As for port on HTTPS server, it only applies to the device that supports SSL function.
2. Restart the device if the port number is set.
■ Procedure to Install Applications
1. Long on to SMS, and click [Install MEAP Application] on the menu.
2. Perform the following settings, and click [Install].
1. Click [Browse], and select the application file and license file to install.
Setting value
1024 to 65535
1024 to 65535
157
2. Technology
Default value / Value after RAM clear
8000
8443