Canon imageRUNNER ADVANCE C3330 Series Service Manual page 161

NOTE:
Only the following users may us SMS via RLS.
• For local device authentication, users with Administrator or DeviceAdmin authority.
• In the case of Server Authentication, users belonging to the group set to "Administrator" in the [Role Association] setting on
the [Settings/Registration] > [Management Settings] > [User Management] > [Authentication Management] > [Preferences]
screen of the Remote UI (Canon Peripheral Admins by default).
■ Password authentication
Enter the password on the SMS login screen for authentication. Only one password can be set for SMS. The login procedure is
shown below.
NOTE:
From this device, password authentication is set to "Stopped" by default.
To log in to SMS with password authentication, it is necessary to log in to SMS with RLS authentication and set [SMS Installer
Service (Password Authentication)] to [Start] in [System Application Management].
For information on the procedure, refer to
1. Access SMS from the browser of a PC on the same network as the MEAP device. The URL is as follows.
URL: https://<IP address of MEAP device>:8443/sms/
Ex.) https://172.16.188.240:8443/sms/
NOTE:
To encrypt the password information input when logging in, SSL of the login screen was made effective. However, it is redirected
to new URL (effective SSL) even when accessing with URL (non-SSL) before.
"Setting the method to login to SMS" on page
149
2. Technology
168.