Baud Rate Control Register 0 (Sibgr0) 0Xf318 (Ch. 0) Baud Rate Control Register 1 (Sibgr1) 0Xf418 (Ch. 1) - Toshiba TX49 TMPR4937 Manual

11.4.7 Baud Rate Control Register 0 (SIBGR0)
Baud Rate Control Register 1 (SIBGR1)
These registers select the clock that is provided to the baud rate generator and set the divide value.
31
15
Reserved
Bit Mnemonic Field Name
31:10 Reserved
Baud Rate
9:8 BCLK
Generator Clock
Baud Rate Divide
7:0 BRD
Value
Reserved
10 9 8 7
BCLK
R/W
11
Baud Rate Generator Clock (Default: 11)
This field sets the input clock for the baud rate generator.
00: Select prescalar output T0 (fc/2)
01: Select prescalar output T2 (fc/8)
10: Select prescalar output T4 (fc/32)
11: Select prescalar output T6 (fc/128)
Baud Rate Divide Value (Default: 0xFF)
This field set divide value BRG of the baud rate generator. This value is
expressed as a binary value.
Figure 11.4.7 Baud Rate Control Register
11-22
Chapter 11 Serial I/O Port
0xF318 (Ch. 0)
0xF418 (Ch. 1)
BRD
R/W
0xFF
Description
16
: Type
: Initial value
0
: Type
: Initial value
Read/Write
⎯
R/W
R/W