Toll Control - Matrix Visionpro System Manual

Toll Control

Toll Control (or, Toll Restriction) is an expense control feature of VISIONPRO. It enables you to configure the
system so that each station has a designated calling permission referred to as the 'Call Privilege'.
Each type of Call Privilege allows the station to call certain numbers and restricts it from calling others. The station
can also be restricted from dialing of specific telephone numbers.
Toll Control can,
• Restrict dialing all local telephone numbers.
• Restrict dialing certain local telephone numbers.
• Restrict dialing telephone numbers starting with '95'.
• Restrict dialing certain area codes (for example, area codes 03 and 04).
• Allow dialing only specific telephone numbers (for example, 2630555).
• Allow dialing only specific area codes.
• Allow dialing only those telephone numbers starting with a particular digit (for example, 1).
Toll Control forms the basis of the features
Using "Dynamic Lock", station users can change the Toll Control (Call Privilege) of their stations on their own. To
support this feature, VISIONPRO offers Toll Control which uses the Allowed and Denied lists. Refer
Denied Lists" to configure the lists.
How it works
• When a call is made from a station, the VISIONPRO compares each digit of the dialed number string with
the number strings configured in allowed and denied lists.
• If the dialed number string matches with any of the number strings available in the allowed list,
VISIONPRO dials the number on the trunk; else compares with the number strings in the denied list.
• If the dialed number string matches with any of the number strings available in the denied list,
VISIONPRO restricts dialing the number and gives error tone to the station user.
• If the dialed number string matches with a number string that is available in both allowed and denied
lists, then allowed list is given priority and the dialed number is dialed out on the trunk.
How to configure
Take a pen and a paper. Write down the Toll Control to be assigned to each station properly.
1.
Check whether the requirement can be met by using the default allowed and denied lists.
2.
If the default allowed lists satisfy the requirement, then assign allowed lists to the stations using commands
3.
4501 and 4502 for Day and Night time respectively.
If default denied lists satisfy the requirement, assign denied lists to the stations using commands 4511 and
4.
4512 for Day and Night time respectively.
Matrix VISIONPRO System Manual
"Dynamic Lock".
"Allowed and
196