Matrix Visionpro System Manual page 231

Program Internal Inter Digit Wait Timer
System Parameters
Load default configuration
Load default values of all timers
Configuring the Companding Type
Displaying the system's version and revision
System Security (Passwords)
Change SE Password
Change SA Password
Time Table
Program the system in Manual/Auto mode
Set Day or Night mode
Program the time table
Toll Control
Assign allowed list to a station during Day time
Assign allowed list to all stations during Day time
Assign allowed list to a station during Night time
Assign allowed list to all stations during Night time
Assign denied list to a station during Day time
Assign denied list to all stations during Day time
Assign denied list to a station during Night time
Assign denied list to all stations during Night time
Assign allowed list to a station for locked condition
Assign allowed list to all stations for locked condition
Assign denied list to a station for locked condition
Assign denied list to all stations for locked condition
Trunk Access Group (TAG)
Put trunk(s) in Trunk Access Group (TAG)
Put same trunk(s) in all Trunk Access Groups
Program rotation code for a group
Program same rotation code for all the groups
Default a Trunk Access Group
Default all Trunk Access Groups
225
3009-Seconds
1103-Reverse SE Password
1107-*-#
1108-Code
1110
1104-Old SE Password-New SE Password
1105-Old SA Password-New SA Password
1051-0/1
1052-1/0
1053-Day-Start Time-End Time
4501-1-Station-Allowed List
4501-*-Allowed List
4502-1-Station-Allowed List
4502-*-Allowed List
4511-1-Station-Denied List
4511-*-Denied List
4512-1-Station-Denied List
4512-*-Denied List
4521-1-Station-Locked Allowed List
4521-*-Locked Allowed List
4522-1-Station-Locked Denied List
4522-*-Locked Denied List
4402-1-Trunk Access Group-Trunk0...Trunk2/#
4402-*-Trunk0.....Trunk2/#
4403-1-Trunk Access Group-Rotation Code
4403-*-Rotation Code
4401-1-Trunk Access Group-#
4401-*-#
Matrix VISIONPRO System Manual