Matrix Visionpro System Manual page 35

Year is from 00 to 99 (here, base year is '2000'. Enter '07' for year '2007')
Day is from 1 to 7 where, 1 = Sunday.
For more details, refer
Set Current Time
• Dial 28-Hour-Minute
Where,
Hour is from 00 to 23.
Minute is from 00 to 59.
Time has three parameters: Hour, Minute and Second. However, the above command has only two
parameters. The third parameter, Seconds will be set as '00' whenever new time is programmed. For more
details, refer "Real Time Clock (RTC)".
Set New SE Password
• Dial 291-New SE Password
Where,
SE Password is a 4 digit number string. Valid digits are from 0-9.
For more details, refer
Set New SA Password
• Dial 292-New SA Password
Where,
SA Password is a 4 digit number string. Valid digits are from 0-9.
For more details, refer
Station Parameters
Following Station Parameters can be configured using the wizard,
• Class Of Service
• Toll Control
• Clear All the Features
• Flash Timer for station
• Flexible Number
• Operator Station
Class of Service (CoS)
• To assign CoS to individual stations, dial,
31-Ext-Day CoS Group-Night CoS Group
29
"Real Time Clock (RTC)".
"System Security (SE and SA
"System Security (SE and SA
Passwords)".
Passwords)".
Matrix VISIONPRO System Manual